KRTK 100-401/454UEG-S – Pump KSB Combo

Description

Scope of delivery

1. KRTK 100-401/454UEG-S
2. ZAD10100 Claw
3. ZAD10100 Bend & foot
4. ZAD101000 Lifting Chain

Operating data

Design

Driver, accessories
Requested flow rate 700.00 m3/h
Requested developed head 30.00 m
Pumped medium Water
Clean water
Not containing chemical and
mechanical substances which
affect the materials
Ambient air temperature 20.0 °C
Fluid temperature 20.0 °C
Fluid density 998 kg/m3

Actual flow rate 700.00 m3/h
Actual developed head 30.00 m
Efficiency 80.7 %
Power absorbed 70.80 kW
Pump speed of rotation 1481 rpm
Shutoff head 48.23 m
Design Single system 1 x 100 %
Performance test No

Fluid viscosity 1.00 mm2/s
Max. power on curve 79.43 kW

Tolerances to ISO 9906 Class
3B; below 10 kW acc. to
paragraph 4.4.2

Design Close-coupled submersible
Orientation Vertical
Suction flange pump
according to(DN1)

unmachined

Discharge flange pump
according to(DN2)

DN 200 / PN 10 / Drilled
according to EN 1092-2
Shaft seal 2 mech. seals in tandem
arrangement with oil reservoir

Manufacturer KSB
Type MG
Material code SIC/SIC/NBR

Impeller type Multivane radial flow impeller

(K)

Wear ring Casing wear ring
Impeller diameter 351.0 mm
Free passage size 80.0 mm
Direction of rotation from drive Clockwise
Temperature sensor PT100
inboard

With

Color Ultramarine blue (RAL 5002)

KSB-blue

Driver type Electric motor
Model (make) KSB
Motor const. type KSB Sub. motor
Frequency 50 Hz
Rated voltage 400 V
Rated power P2 95.00 kW
Available reserve 34.17 %
Rated current 186.0 A
Starting current ratio 6.3
Insulation class H according IEC 34-1
Motor enclosure IP68
Cos phi at 4/4 load 0.81
Motor efficiency at 4/4 load 91.3 %
Temperature sensor Bimetal switch 2x
Motor winding 400 / 690 V

Number of poles 4
Starting mode Direct/Star-delta possible
Connection mode Delta
Motor cooling method Surface cooling
Motor version U
Cable design Rubber hose
Cable entry Sealed along entire length
Power cable S1BN8-F 4G25
Number of power cables 2
Control cable S1BN8-F 10G1.5
Number of control cables 1
Moisture sensor With
Cable length 10.00 m

Materials G
General criteria for a water analysis: pH-value >= 7; chloride
content (Cl) <=250 mg/kg. Chlorine (Cl2) <=0.6 mg/kg.

Packaging

Outdoor storage at -40°C to +50°C for up to 3 months. Packet
must be covered. No corrosion protection, only transport
protection.

Nameplates
Installation parts
Notes
Pump casing (101) Grey cast iron EN-GJL-250
Discharge cover (163) Grey cast iron EN-GJL-250
Shaft (210) Chrome steel 1.4021+QT800
Impeller (230) Grey cast iron EN-GJL-250
Bearing bracket (330) Grey cast iron EN-GJL-250

O-Ring (412) Nitrile rubber NBR
Casing wear ring (502.1) Grey cast iron EN-GJL-250
Shaft protecting sleeve (524) Chrome steel 1.4021+QT800
Motor housing (811) Grey cast iron EN-GJL-250
Motor cable (824) Chloroprene rubber
Screw (900) CrNiMo steel A4

Packaging category B1 Wooden or plywood
case, cover provided with
polyproylene cellular sheet,
outdoor storage up to 3
months
Packaging for transport Truck
IPPC Standard ISPM 15 Yes

Packaging for storage Indoor

Nameplates language International Duplicate nameplate With
Installation type Portable
Scope of supply Pump with installation parts
Installation depth 4.50 m
Material concept G
Foot
Size
Foot type Single feet
Material

Lifting chain / -rope
Type Chain
Material CrNiMo steel 1.4404
Length 5.00 m
Max. load 1250 kg

KRTK 200-401-954UNG-P – KSB Pump Data Sheet