TORK CRAFT Corner Round Bit 1/2’Xr3/8′ – CKP1208

Description

Corner Round Bit 1/2’Xr3/8′

 

Corner Rounding Router Bit

This
an affordable router bit range that is well supported throughout South Africa. All
our Tork Craft router bits are Tungsten tipped. Tork Craft is a well-known BRAND
in most retail stores.

At a glance:

½" Ø Shank router bit with a 9,5mm (3/8") radius
to profile a roundover shape in wood.

Application:

This router bit is used with a plunge router to profile the edge of wood to produce a rounded edge that has a 9,5mm radius

Definition:
The basic edge-forming bit, the corner-rounding bit rounds an edge to a given radius.
The tool is shouldered to cut a fillet. The cut can be used to ease edges, as a
simple profile, or as a part of a complex one. Also known as roundover, rounding
over, and quarter-round. If a smaller pilot bearing is used, a second shoulder can
be produced, in effect making the bit a beading bit.

Please ensure that you select a router bit with a
shank (shaft) size that will fit your router. If are in doubt, contact us and we
will confirm if it will work for you.