A valid RSA ID documentDescription
Metal weld bead remover (PFM 17)
- Fast, clean removal of weld beads in one work step with the newly developed metal weld bead remover
- Small metal chips are generated during face milling (no metal dust that is a health hazard)
- One-touch controller: Patented, tool-free setting of the cutting depth in 0.1mm steps.
- Ready for use in a matter of seconds thanks to fixable, magnetic guide rail (50 cm long, expandable).
- Simple, comfortable change of the indexable inserts at the milling head
- Slim handle area and large bow-type handle that can be adjusted without tools for safe, uniform guidance
- Vario Tacho Constamatic (VTC) Full-wave Electronics with Thumbwheel: for working at customised speeds to suit the application material and speeds that remain almost constant, even under load
- Electronic soft start and restart protection
The machine shown may differ in equipment and technical details depending on the configuration.
Kindly pay attention to delivery scope and product description.
Accessories included only if listed in the delivery scope.
Kindly pay attention to delivery scope and product description.
Accessories included only if listed in the delivery scope.
Characteristics
No-load speed
8000 – 12600 rpm
Rated input power
1700 W
Output power
970 W
Removal width
25 mm / 0.984 “
Removal height
– 1.5 – 10 mm // – 0.059 – 0.39 “
Grading of cutting depth setting
0.1 mm / 0.004 “
Weight (without power cable)
4.6 kg
Cable length
3.6 m
Vibration
Vibration
4.1 m/s²
Uncertainty of measurement K
1.5 m/s²
Noise emission
Sound pressure level
91 dB(A)
Sound power level (LwA)
102 dB(A)
Uncertainty of measurement K
3 dB(A)
SCOPE OF DELIVERY:
- Magnetic guide rail (50 cm long)
- Screwdriver for Torx screws 15
- Screwdriver SW 4 with T-handle
- Open-jawed spanner SW 10
- Plastic carry case
- 3 Carbide indexable inserts Universal
- Bow-type handle
Reviews
There are no reviews yet.