TORK CRAFT Decking Tool 8G Std Head Pre-Drill & Countersink – TCDT008-01

Description

Decking Tool 8G Std Head Pre-Drill & Countersink

 

TorkCraft – Decking Tool Kit

Diameter: 3.2 mm
CSK Diameter: 6.3 mm
CSK Angle: 45 Degrees
Hole Depth: 30 mm

Application:

The Tork Craft Decking Tool, the ultimate all-in-one pre-drilling countersink tool! Purpose built of decking and woodworking applications, especially where stainless steel screws are used. The single drilling countersinking action of the tool allows for an easier, quicker and more professional looking finish.

• HSS Parabolic Bits for faster drilling
• Decking & woodworking applications
• Easy, quick & professional looking finish

Installation

• Always drill in a straight and controlled manner.
• The collar will stop spinning when the hole depth is reached.

Replacing Bit

• Make sure power drill is safely in OFF mode and remove the decking tool
  from the drill.
• The flat side of the drill bit must face the set screw then tighten.
• Buy Replacement Drill Bits

Included

• 1 x 8G Decking Tool
• 2 x Replacement Bits
• 1 x Hex Wrench

NOTE:
For us with standard 8G head screws

WARNING: Using any tool can be dangerous. Always select
the right tool for the job.